support@fixiz-academy.com

Jointing compound

Paste that covers joints and screw heads.

  • Where it is used: Joints, screws and corners.
  • Watch out: Several thin coats beat one thick one. Sand with extraction.

Brands and types in the UK (6)

British Gypsum Gyproc Joint Filler 12.5kg

British Gypsum Gyproc Joint Filler 12.5kg

Gyproc Joint Filler is a gypsum-based setting jointing compound for bedding tape and filling plasterboard joints.

Technical data
  • 12.5kg bag
  • Gypsum-based
  • Sets rather than air-dries
  • Min. Recoat Time: 140 minutes
  • Working Time: max 60 minutes

Source: Builder Depot

Shop: Builder Depot
View in shop ↗
British Gypsum Gyproc Quicksand Joint Cement 25kg

British Gypsum Gyproc Quicksand Joint Cement 25kg

Gyproc Quicksand is an air-drying jointing compound for all stages of plasterboard jointing.

Technical data
  • 25kg bag
  • Air-drying formula
  • Water Requirement: 12.25 litres per bag
  • Can be sanded to a smooth finish
  • Minimum Application Temperature: 5°C

Source: Builder Depot

Shop: Builder Depot
View in shop ↗
Knauf Premium Joint Filler - 10kg

Knauf Premium Joint Filler – 10kg

Knauf Premium Joint Filler is a gypsum-based powder for finishing plasterboard joints.

Technical data
  • 10 kg bag
  • Approx. 90-minute working time
  • Setting time: around 120 minutes
  • Estimated coverage of 55m2 per 10kg bag
  • Shelf life: up to 9 months

Source: Wickes

Shop: Wickes
View in shop ↗
Image: Knauf
Knauf Fill & Finish Light - 5kg

Knauf Fill & Finish Light – 5kg

Knauf Fill & Finish Light is a ready-mixed compound for bedding tapes, beads and finishing joints.

Technical data
  • 5 kg tub
  • Ready mixed
  • Coverage: 11.25m2 per 5kg tub
  • Drying Time: 12–24 hours
  • Very low shrinkage

Source: Wickes

Shop: Wickes
View in shop ↗
Image: Knauf

British Gypsum Gyproc Easi Fill 60 Compound – 10kg

British Gypsum Gyproc Easi Fill 60 is a lightweight plasterboard joint filler and finish.

Technical data
  • 10 kg bag
  • Working time: 60 minutes
  • Second coat after 140 minutes
  • Coverage: 41 m2
  • EN 13963, type 3B

Source: Wickes

Shop: Wickes
View in shop ↗
SMIG A-2 Jointing, Filling & Finishing Compound - 5kg

SMIG A-2 Jointing, Filling & Finishing Compound – 5kg

SMIG A2 Jointing Compound is a ready-mixed filler for jointing plasterboards and filling gaps.

Technical data
  • 5 kg tub
  • Ready mixed
  • Coverage: 5 m²
  • Drying Time: 1-2 hours
  • Up to 5mm per coat

Source: Wickes

Shop: Wickes
View in shop ↗
Image: SMIG

Sources: product listings from Builder Depot, Wickes, checked on 31-10-2026. Photos are from Builder Depot (with permission) the manufacturer or the shop (shown under each photo); where there is no photo we show a drawing. Original Fixiz Academy text; data can change, always check the manufacturer data sheet.

← Back to materials