← Back to materials
Jointing compound Paste that covers joints and screw heads.
Where it is used: Joints, screws and corners. Watch out: Several thin coats beat one thick one. Sand with extraction.
Brands and types in the UK (6)
British Gypsum Gyproc Joint Filler 12.5kg Gyproc Joint Filler is a gypsum-based setting jointing compound for bedding tape and filling plasterboard joints.
Technical data 12.5kg bag Gypsum-based Sets rather than air-dries Min. Recoat Time: 140 minutes Working Time: max 60 minutes Source: Builder Depot
Shop: Builder Depot
View in shop ↗
British Gypsum Gyproc Quicksand Joint Cement 25kg Gyproc Quicksand is an air-drying jointing compound for all stages of plasterboard jointing.
Technical data 25kg bag Air-drying formula Water Requirement: 12.25 litres per bag Can be sanded to a smooth finish Minimum Application Temperature: 5°C Source: Builder Depot
Shop: Builder Depot
View in shop ↗
Knauf Premium Joint Filler – 10kg Knauf Premium Joint Filler is a gypsum-based powder for finishing plasterboard joints.
Technical data 10 kg bag Approx. 90-minute working time Setting time: around 120 minutes Estimated coverage of 55m2 per 10kg bag Shelf life: up to 9 months Source: Wickes
Shop: Wickes
View in shop ↗
Knauf Fill & Finish Light – 5kg Knauf Fill & Finish Light is a ready-mixed compound for bedding tapes, beads and finishing joints.
Technical data 5 kg tub Ready mixed Coverage: 11.25m2 per 5kg tub Drying Time: 12–24 hours Very low shrinkage Source: Wickes
Shop: Wickes
View in shop ↗
🟫 British Gypsum Drawing, no shop photo
British Gypsum Gyproc Easi Fill 60 Compound – 10kg British Gypsum Gyproc Easi Fill 60 is a lightweight plasterboard joint filler and finish.
Technical data 10 kg bag Working time: 60 minutes Second coat after 140 minutes Coverage: 41 m2 EN 13963, type 3B Source: Wickes
Shop: Wickes
View in shop ↗
SMIG A-2 Jointing, Filling & Finishing Compound – 5kg SMIG A2 Jointing Compound is a ready-mixed filler for jointing plasterboards and filling gaps.
Technical data 5 kg tub Ready mixed Coverage: 5 m² Drying Time: 1-2 hours Up to 5mm per coat Source: Wickes
Shop: Wickes
View in shop ↗
Sources: product listings from Builder Depot, Wickes, checked on 31-10-2026. Photos are from Builder Depot (with permission) the manufacturer or the shop (shown under each photo); where there is no photo we show a drawing. Original Fixiz Academy text; data can change, always check the manufacturer data sheet.
← Back to materials